Refers to the minimum current that the relay can generate the draw action. In normal use, the given current must be slightly greater than the draw current for the relay to be stable To work. The working voltage added to the coil, generally do not exceed 1.5 times of the rated working voltage, otherwise it will produce a large current and burn the coil.

When choosing a relay with QC lead-out method, please do not use soldering to connect the load lead-out end of the relay. If other welding methods are used, it is also necessary to ensure that the heat generated by welding will not affect the function of the magnetic latching relay

Please apply a suitable voltage to the coil according to the coil polarity specified in the manual, otherwise the operating voltage of the relay will increase or even not operate; it needs to be changed When driving the polarity, please use the "-R" type relay.