Home
>
Products
>
IC For Metering
>
AT32F403ARCT7 Microcontroller Metering Chip

AT32F403ARCT7 Microcontroller Metering Chip

AT32F403ARCT7 microcontroller metering chip is used in smart meters and electronic metering products that require control and data processing. It supports compact meter design, reliable operation and power measurement system integration.

Email

AT32F403ARCT7 Microcontroller Metering Chip technical overview

AT32F403ARCT7 Microcontroller Metering Chip is organized for buyers comparing IC For Metering for smart energy meters, current measurement, EV charging, meter cases, LCD modules, relays, terminals, and power monitoring projects. Review the existing product details and images below, then compare related Eoswell products for compatible sourcing options.

AT32F403ARCT7

The AT32F403A incorporates high-speed embedded memories (up to 1024 KBytes of internal Flash memory, 96+128 KBytes of SRAM), the extensive external SPI Flash (up to 16 MBytes addressing capability), and enhanced GPIOs and peripherals connected to two APB buses. Any block of the embedded Flash memory can be protected by the “sLib”, functioning as a security area with code-excutable only.

The AT32F403A offers three 12-bit ADC, two 12-bit DAC, eight general-purpose 16-bit timers plus two general-purpose 32-bit timers, and up to two PWM timers for motor control. It supports standard and advanced communication interfaces: up to three I2Cs, four SPIs (all multiplexed as I2Ss), two SDIOs, eight USARTs/UARTs, an USBFS, and two CANs.

The AT32F403A operates in the -40 to +105 °C temperature range, from a 2.6 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power application.

The AT32F403A offers devices in different package types. Depending on the different packages, the pin-to-pin is completely compatible among devices, and also the software and functionality. Only different sets of peripherals are included.

Features:

Core: ARM® 32-bit Cortex® -M4 CPU with FPU

− 240 MHz maximum frequency, with a memory protection unit (MPU), single-cycle multiplication and hardware division

− Floating point unit (FPU) and

− DSP instructions

Memories

− 256 KBytes of internal Flash memory

− sLib: configurable part of main Flash set as a libruary area with code excutable but secured, non-readable

− SPIM interface: Extra interfacing up to 16 Mbytes of the external SPI Flash (as instruction/data memory)

− Up to 96+128 KBytes of SRAM

− External memory controller (XMC) with 16- bit data bus. Supports multiplexed PSRAM/NOR and NAND memories

Packages