ADL200N CT Single Phase Electric Energy Meter
- OSWELL
- CHINA
- 7-15
- 10K
ADL200N CT single phase electric energy meter provides compact DIN rail metering for residential, commercial and light industrial power monitoring. It is suitable for CT connected energy measurement, billing data collection and smart distribution applications.
Application:
l Photovoltaic Grid-connected System
l Micro Inverter System
l Energy Storage System
l AC Coupling System
Specifications：
Item | Performance Parameters |
Rated Voltage | AC 110V – 240V |
Input Current | 80A, 120A, 200A, 300A |
Overload | 1.2 times rated (continuous); 2 times rated/1 second; |
Power Consumption | ＜0.2VA |
Accuracy Class | ±0.5% |
Power | Active, reactive, apparent power, error ±0.5% |
Grid Frequency | 45~65Hz, error ±0.5% |
Response Rate | ≤100ms (voltage, current, power) ≤1s (electrical energy) |
Measurement Category | CAT III |
Electric Energy | Active energy ：Class B (split current transformer) / Class C (closed current transformer) Reactive energy (Class 2 accuracy) |
Electromagnetic Compatibility | Electrostatic discharge immunity class III Electrical fast transient burst immunity class IV Surge (shock) immunity Class IV |
Dielectric Strength | Between communication and signal input, AC3kV 1min |
Insulation Resistance | Input and output terminals to casing >100MΩ |
Interface & Communication Protocol | RS485 interface and Modbus RTU protocol |
Communication Address | Modbus RTU:1~ 247 |
Band Rate | Support 1200bps-38400bps |
Operating Temperature | -40℃～+70℃ |
Storage Temperature | -40℃～+70℃ |
Relative Humidity | ≤95% (without condensation) |
Altitude | ≤2000m |
Installation Environment | Indoor use |
Pollution Degree | Class 2 |
Mains supply voltage fluctuations are not to 10% of the nominal supply voltage. | |
